Average welding time One dia-inch per minute (for example: 8 minutes for an 8 inches standard wall pipe) Materials Carbon steel (including low-temp applications) Cr-Mo steel alloys (may not require preheat) Duplex stainless steel Welding processes Root pass GMAW (short circuit) Fill pass GMAW (spray transfer) FCAW (flux core) SAW (submerged arc) | Rotator Diameter capacity 75 mm to 1 065 mm (3 to 42 inches) Center line clearance to ground 1 605 mm / 65 in Operation speed range 0.2 to 2 rpm Load capacity 1 360 kg / 3 000 lb Maximum torque 3 955 N-m / 35 000 lb-in Idler roll load capacity 4 535 kg / 10 000 lb |
Dimensions Width - 2.3 m / 7.5 ft Height - 2.7 m / 8.8 ft Shortest configuration length - 9.2 m / 30 ft Longest configuration length - 23.8 m / 77 ft |
The Rotoweld is a modulair built welding solution. You can remove or add sections and other options. Please contact us to find the best set-up for your needs.
Copier manufactures stationary pipe beveling machines. The different models bevel pipes up to 56 inches. We also offer stationary machines that cut and bevel within one operation.
Visit beveling website
Copier manufactures tube bending machines for both portable and stationary use. The various models bent pipes up to 3 inches.
Visit tube bending website
Copier manufactures pipe roll grooving machines, developed for grooving sprinkler and irrigation pipes. The different types groove pipes up to 24 inches.
Visit grooving website
Copier manufactures automated pipe spool welding machines. The available models can handle a large range of pipe diameters: from 3 up to 42 inches.
Go to homepage